Autowatch Ghost 2
Autowatch Ghost 2, an innovative immobiliser that protects against key-long stealing, cloning and relay theft. It is a discreet device that operates in complete silence. A unique PIN code has to be entered through the buttons on the steering wheel and center console.
It is totally undetectable by thieves using diagnostic tools, as it does emit radio signals. It's also convenient because it doesn't require a tracker or additional fobs.
Cost of installation
A ghost immobiliser or ghost alarm, is a subtle device that is incorporated into the CAN data network of a vehicle. It does not require additional LED indicators or fobs. This makes it virtually undetectable to thieves and operates using a different mechanism than standard car alarms. It prevents the vehicle from starting until a specific sequence of buttons is initiated by the owner. This ensures only the owner of the vehicle can drive the vehicle and reduce the chances of it being stolen.
Ghost immobilisers are more affordable than traditional devices, and can be installed by qualified technicians in a matter of hours. They can be installed on multiple vehicles, making them an affordable way to increase your car's safety. Ghost-immobilisers can be used in conjunction with an electronic tracking system to provide an additional layer of security for your vehicle.
Modern vehicles are easy to target for thieves using sophisticated equipment that can clone remote keys, open the vehicle, and then take it away. This is why it is so important to protect your vehicle with a ghost immobiliser. It will stop the car from moving unless you press a certain sequence of buttons, providing you with peace of mind when you hand your car over to valet parking or hiring drivers.
The Autowatch Ghost 2 immobiliser is an innovative car security system that guards against contemporary theft methods such as key cloning. The small device plugs into the CAN system in your vehicle and shuts off the engine after you enter a PIN code. This is a discrete and hidden device that is not affected by device spoofing or signal jamming. It also sends alerts to your phone if someone attempts to tamper with your vehicle.
The Autowatch Ghost 2 immobiliser is priced at just PS499 with VAT and can be installed in just a few hours at home or workplace by one of our highly skilled TASSA (Autowatch) registered, DBS-security checked installers. It is a high-tech and low-maintenance device that is able to be easily transferred from vehicle to vehicle and is compatible with all CAN-bus systems.
Cost of replacing keys
The Autowatch Ghost is a sophisticated piece of technology that offers advanced protection against key-cloning as well as hacking and theft of vehicles. It does not require additional key fobs, LED indicators or other devices. Our certified technicians can install it in the majority of vans and cars in only a couple of hours. The system can also be used in conjunction with car trackers to make it more secure.
immobiliser ghost is linked to your vehicles CAN data network, which makes it undetectable to thieves. It won't cause any diagnostic lights to illuminate, because there are no radio signals. The criminal will also not be able access the OBD port on your vehicle, since it is directly connected to the ECU (Engine Control Unit). This will stop them from installing new key fobs or replacing the ECU that would normally allow them to start the engine.
The ghost immobiliser is completely sealed and hidden within the vehicle harness. This makes it almost impossible for thieves to locate. The system uses buttons already on the steering wheel and dash to generate a unique PIN sequence that must be entered before the vehicle can begin. Monty's can also programme a Service/Valet option, which allows you to temporarily start the vehicle without having to enter the PIN code. This is helpful when you're handing your vehicle over to valet parking or a mechanic service.
The CAN Ghost will stop the vehicle from moving if the PIN code has not been entered. It can also stop the engine or the gearbox based on the specifications of your vehicle. It is also possible to connect to a car tracker, so that you can monitor your vehicle's location on a map from any device connected to the internet.
The system is incredibly easy to install and can be moved from vehicle to, making it a great alternative for classic and sports cars. It also requires no batteries or power cables, since it is fully connected to the CAN data network of your vehicle. It is virtually undetectable and can be installed in a matter of hours by one of our TASSA registered, DBS security checked and certified technicians.
Cost of replacing a vehicle
Autowatch Ghost immobiliser is a cutting-edge technology that offers the most advanced protection against key cloning and hacking. It is directly integrated with the vehicle’s ECU to create a security barrier that is virtually impossible to break without a PIN code. The system is also TASSA-certified and insurance-approved, making it a fantastic option for those looking to improve the security of their car. This system can save you money on car insurance as most insurers give discounts to vehicles with this system.
The Ghost system is unnoticeable to thieves, and it operates without radio signals. It connects to the vehicle's CAN data network, and requires a unique PIN to start your engine. It also stops hackers from accessing the system through diagnostic scans or tampering the port OBD. Additionally, the device uses an unique algorithm to detect and deactivate keys that are cloned.
While it is possible to install Ghost immobilisers on your own however, the process is dangerous. It is best to have it done by a certified professional. An incorrect installation could damage the wiring of your vehicle and render the device ineffective. A DIY installation may also void the warranty of your vehicle and device.
The majority of Ghost users have high levels of satisfaction with the device. They enjoy the peace of mind and added security it provides. The device is also easy to use and discreet in appearance. Most of them are happy with the fact that it will protect their vehicle from theft even in the event that they lose their keys.
However certain customers have had problems with the device's stop/start feature. This can be caused by an improper configuration or a problem independent of the Ghost immobiliser. However, these issues are very rare and can be resolved by contacting the company who installed the Ghost.
It is recommended to hire an experienced Ghost installer, since when the device is damaged by a skilled hacker it could cost a lot to repair or replace. To prevent this from happening, make sure that the installer has a good track record and is certified. An experienced and reliable installer will have a solid commitment to customer satisfaction and will guarantee the quality of their work.
Insurance costs
A ghost immobiliser is an anti-theft device which stops thieves from starting your car. It works by connecting to the car's CAN data network and generating an individual code sequence. This code must be entered prior to the start of the engine. The device can be easily transferred between vehicles, and it does not require batteries or power cables. It can also be used to supplement a traditional car alarm system or as an alternative. It can also be programmed to work with a new vehicle if you're thinking of selling or trading your vehicle in the near future.
The autowatch ghost is immobiliser that is easily installed and is not easily detected by thieves. It uses the buttons on your car to input your PIN code. This makes it difficult for thieves discover its presence. It is also extremely durable and weatherproof, so it is able to endure any kind of weather. It is perfect for classics, sports cars and luxury vehicles that require battery isolation when being parked for long periods of time.
This advanced technology prevents the cloning of signals and bypassing door locks by directly connecting to the CAN. It is an TASSA verified immobiliser that is regarded by insurance companies as a reliable deterrent to theft. It also features an innovative feature called Stealth Active, which is unnoticed by key equipment for cloning.
Contrary to other car immobilisers the Autowatch ghost is a low-maintenance option that requires no wiring, so it doesn't interfere with the vehicle's electrical system or aesthetics. The installation process is easy and can be done by a skilled technician. It is important to note that the device could be damaged if it's installed improperly. It's important to hire a professional to install the device in order to protect your vehicle.
If you're thinking of installing a ghost immobiliser yourself is advisable to seek out professional help. Attempting to do it yourself can lead to a number of issues, including tripping wires and causing electrical faults. Additionally, improper placement can make the device useless or easily spotted by thieves. It is therefore a good idea for you to incorporate an immobiliser with other security measures, such as GPS monitoring or alarm systems. This increases the chances of obtaining lower insurance costs.